The thump
If the amplifiers are on while the mixer and processors start up, the switch-on noise goes straight to the speakers. At best it is a loud thump; at worst it damages a driver.
The order
On: mixer and processors first, amplifiers last. Off: amplifiers first. A sequencer does this from one switch, a second between each outlet.
Inrush
A full rack switched on at once can trip a breaker or a generator. Switching outlets one by one spreads the load.
Watch the mains
The DL-208B shows the incoming voltage, so you can see a bad generator supply before you plug in the amps.
Products in this guide




DL-208B
Rack Power Sequencer
Switches a full rack on in order, so the amps come up last and the speakers don't thump.
Power sequencer8 sequenced + 2 direct outlets2U

DBA-701U
700W Power Amplifier
700 W RMS for big rooms, on 2/4 ohm or a 70/100V line.
700 W RMS2/4 ohm, 70/100V

DBA-501U
500W Power Amplifier
500 W RMS, fan-cooled, on 2/4 ohm or a 70/100V line.
500 W RMS2/4 ohm, 70/100V

234-XS
4-Way Crossover
Stereo 2-way and 3-way, or mono 4-way, with 24 dB/oct filters.
CrossoverXLR